Huber Chillers are called Minichiller® or Unichiller® 
Small footprints, robust and service friendly units, modern energy
management, simple to use, flexible functionality, modular
technology – these are the results of designs without compromise.
To find out how much water and money the minichiller® could save you click here

Minichiller® and Unichiller® are intelligent chillers which are used mainly as an environmentally friendly and economic alternative to tap water for process cooling. Low temperatures increase efficiency and recovery rates in gas condensation processes. In contrast to tap water a desired setpoint can be selected between -10/-20°C to 40°C and controlled with a temperature stability of +- 0.5°C. The product range includes 27 air cooled and 26 water cooled models, with cooling powers from 0.3 kW to 50 kW. Most models can be factory fitted with a heater. The casings are made of stainless steel to ensure long life and high quality.
 
Minichiller® and Unichiller®
Low-Cost models in minitower and desktop housing
present themselves in classic look with cooling powers from 0.3 to 2.5 kW. Two water-cooled models in tower casings with a minimal footprint. Excellent control performance is achieved using a modern and easy to use microprocessor based controller with a large display. Thanks to high safety standards and a robust construction especially suited to removing process heat with continuous operation.
Minichiller®, this bestsellers are extremely compact circulation coolers with a cooling capacity of 300 or 400 watts at 15°C. They ideally can be used for back cooling of condensers from vacuum pumps, for 1 litre rotation evaporators or smaller heat exchangers.
With the exception of the two models in tower casings (UC006w and UC009w) all units can be factory fitted with optional heating and independent overtemperature protection. The maximum working temperature increases to 100°C and the temperature stability is +/-0.5 K. The new construction allows constant operation in ambient temperatures up to 40°C. The water-cooled models are especially quiet and require little cooling water even at full cooling power. Due to increasing costs of water the ROI is exceptionally short. All models with maximum pump pressure of 3 bar have an adjustable bypass and a pressure gauge. The low cost units can be factory fitted as "Advanced" with a RS232 interface and external sensor connection.
 
Unichiller® top models in tower housing with CC-Pilot
The proven Huber tower models offer power with small footprints. These top models have the exchangeable Compatible Control CC-Pilot. These models are used in both research and production, the range of cooling powers available is from 1.6 to 100 kW.
All models have the exchangeable Compatible Control „CC-Pilot". The cooling power is regulated by an automatic stepper motor controlled valve to adapt to the actual requirements. The intelligent and environmentally friendly energy management system minimises heat emission and reduces the operating costs (cooling water and electricity) of the water cooled models. The sound levels of the air-cooled models have been minimised through the use of speed controlled condenser fans. The refrigeration systems are exceptionally robust and can operate in environmental temperatures up to 40°C. The internal CAN technology allows connection to a range of power and control components and is therefore suitable for this wide ranging product group:
The new Unichillers® with air- or water-cooled refrigeration systems are available from cooling powers of 1.7 kW for typical laboratory applications. The powerful Unichillers® with cooling powers up to 100 kW are also used as a central supply of cooling water for labs or complete buildings.

For the highest quality and flexibility requirements: For reasons of quality and a long operational life the casings are all made of stainless steel. The options weather protected and/or winter operation allow the big Unichillers® to be located outdoors and controlled remotely by the CC-Pilot at the application. Stronger pumps are available for systems with high pressure drops, a maximum delivery pressure of 6 bar and flow rates of over 200 litre per minute are available. All models can be used with natural refrigerants as an option.
 
Process circulators with heating: With the exception of the two models UC006Tw-NR and UC009Tw-NR all units can be factory fitted with optional heating and independent over-temperature protection. Increasing the maximum working temperature to 100 °C and the temperature stability to ± 0,2 K. The new construction allows constant operation in ambient temperatures up to 40 °C. The water-cooled models are especially quiet and require little cooling water even at full cooling power. Despite the increasing costs of water the ROI is exceptionally short. All models with maximum pump pressure of 2,5 bar have an adjustable bypass and a pressure gauge.